| 序號 |
作者姓名 |
論文名稱 |
學科門類編號 |
發表年 |
刊物名稱 |
論文類型編號 |
是否為SCI/SSCI源刊 |
| 1 |
鄒鐵方 |
車-摩托車碰撞中騎乘人員運動學響應的差異 |
02 |
2020 |
汽車安全與節能學報 |
3 |
否 |
| 2 |
鄒鐵方 |
汽車-摩托車碰撞事故中騎乘人員損傷差異對比研究 |
02 |
2020 |
汽車工程 |
2 |
否 |
| 3 |
鄒鐵方 |
New observations from real-world vehiclepedestrian collisions in reducing ground related injury by controlling vehicle braking |
02 |
2020 |
International Journal of Crashworthiness |
4 |
是 |
| 4 |
鄒鐵方 |
Pedestrian gaits observed from actual pedestrianvehicle collisions |
02 |
2020 |
International Journal of Crashworthiness |
4 |
是 |
| 5 |
李鳳玲 |
A Firefly Algorithm with Self-adaptive Population Size for Global Path Planning of Mobile Robot |
01 |
2020/10/1 |
IEEE ACCESS |
4 |
是 |
| 6 |
苗秀娟 |
Aerodynamic Performance of a High-Speed Train Passing through Three Standard Tunnel Junctions under Crosswinds |
01 |
2020.5 |
Applied sciences |
4 |
是 |
|
| 7 |
杜榮華 |
Battery aging-and temperature-aware predictive energy management for hybrid electric vehicles
|
02 |
2020 |
JOURNAL OF POWER SOURCES |
4 |
是 |
| 8 |
杜榮華 |
Abnormal Road Surface Recognition Based on Smartphone Acceleration Sensor |
02 |
2020 |
Sensors |
4 |
是 |
| 9 |
時樂泉（導師杜榮華） |
負載擾動下永磁同步電機控制系統設計與仿真 |
02 |
2020 |
計算機仿真 |
4 |
否 |
| 10 |
毛聰 |
Effect of laser-discrete-quenching on bonding properties of electroplated grinding wheel with AISI 1045 steel substrate and nickel bond |
01 |
2020 |
Chinese Journal of Aeronautics |
4 |
是 |
| 11 |
劉鑫（Xin Liu） |
Construction of probability box model based on maximum entropy principle and corresponding hybrid reliability analysis approach |
01 |
2020 |
Structural and Multidisciplinary Optimization |
4 |
是 |
| 12 |
劉鑫（Xin Liu） |
An efficient multi-objective optimization method based on the adaptive approximation model of the radial basis function |
01 |
2020 |
Structural and Multidisciplinary Optimization |
4 |
是 |
| 13 |
劉鑫 |
基于概率-橢球混合模型的緩沖氣囊防護特性可靠性分析方法 |
01 |
2020 |
機械工程學報 |
2 |
否 |
| 14 |
劉鑫 |
基于自適應代理模型的汽車乘員約束系統優化設計 |
01 |
2020 |
汽車工程 |
2 |
否 |
| 15 |
劉鑫 |
基于證據理論的機械結構高效可靠性分析方法 |
01 |
2020 |
中國機械工程 |
4 |
否 |
| 16 |
劉鑫 |
基于自適應代理模型的汽車乘員約束系統優化設計 |
01 |
2020 |
振動與沖擊 |
4 |
否 |
| 17 |
胡宏偉（導師） |
Study on PCA-SAFT imaging using leaky Rayleigh waves |
01 |
2020 |
Measurement |
4 |
是 |
| 18 |
徐曉強 |
Chatter Frequency Identification and Amplitude Tracking Using Short-Time Difference Spectrum Analysis |
01 |
2020 |
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT |
4 |
是 |
| 19 |
李碧瓊 |
Design and Simulation of paper roll Packaging Workstation Based on RobotStudio |
|
2019 |
Advances in Computer Science Research,Volume 94 |
4 |
否 |
| 20 |
張志勇 |
Vibration source identification of a heavy commercial vehicle cab based on operational transfer path analysis |
02 |
2020 |
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering |
4 |
是 |
| 21 |
張志勇 |
Semi‐active control of air suspension with auxiliary chamber subject to parameter uncertainties and time‐delay |
02 |
2020 |
International Journal of Robust and Nonlinear Control |
4 |
是 |
| 22 |
張志勇 |
Active cell balancing of lithium‐ion battery pack based on average state of charge |
02 |
2020 |
International Journal of Energy Research |
4 |
是 |
| 23 |
張志勇 |
考慮路面預瞄信息和參數不確定性的空氣懸架半主動控制 |
02 |
2020 |
振動與沖擊 |
3 |
否 |
| 24 |
李岳林 |
Intelligent prediction on air intake flow of spark ignition engine by a chaos radial basis function neural network |
01 |
2020 |
Journal of Central South University |
3 |
是 |
| 25 |
李岳林（導師） |
Predictive Control Of Transient Air-Fuel Ratio for Gasoline Engine Based on Wavelet Network Inversion |
01 |
2020 |
earth environmental science |
4 |
否 |
| 26 |
劉理(通訊作者) |
Reducing CACC Platoon Disturbances Caused by State Jitters by Combining Two Stages Driving State Recognition With Multiple Platoons' Strategies and Risk Prediction |
02 |
2020 |
IEEE Transactions on Intelligent Transportation Systems |
4 |
是 |
| 27 |
龍春光（導師） |
PEEK/ZA8復合材料的制備及力學與摩擦學性能研究 |
01 |
2020 |
中國塑料 |
3 |
否 |
| 28 |
唐宏賓 |
A fault diagnosis method for loose slipper failure of piston pump
in construction machinery under changing load |
02 |
2020 |
Applied Acoustics |
4 |
是 |
| 29 |
王方 |
A Computational Biomechanics Human Body Model Coupling Finite Element and Multibody Segments for Assessment of Head/Brain Injuries in Car-to-Pedestrian Collisions |
02 |
2020 |
International Journal of Environmental Research and Public Health |
4 |
是 |
| 30 |
吳鋼 |
Effect of Acetone-n-Butanol-Ethanol (ABE) as an Oxygenate on Combustion, Performance, and Emission Characteristics of a Spark Ignition Engine |
01 |
2020 |
JOURNAL OF CHEMISTRY |
4 |
是 |
| 31 |
吳鋼 |
Numerical Study on Effects of Key Factors on Performance of CeO2-based Catalyzed Diesel Particulate Filter |
01 |
2020 |
JOURNAL OF THERMAL SCIENCE |
4 |
是 |
| 32 |
吳鋼 |
微粒捕集器分區域微波再生過程功率優化 |
01 |
2020 |
中南大學學報自然科學版 |
3 |
否 |
| 33 |
武和全、胡林等 |
正面碰撞中的老年駕駛員胸部響應研究 |
02 |
2020.8 |
汽車工程 |
2 |
否 |
| 34 |
武和全、胡林等 |
車輛碰撞中乘員骨盆力學響應特性的研究 |
02 |
2020.4 |
汽車工程 |
2 |
否 |
| 35 |
武和全 |
Occupant kinematics and biomechanics during frontal collision in autonomous vehicles—can rotatable seat provides additional protection? |
02 |
2020.1 |
Computer Methods in Biomechanics and Biomedical Engineering |
4 |
是 |
| 36 |
武和全 |
Verification and injury risk study of FE model of upper limbs in elderly under dynamic loading |
02 |
2020.4 |
Multimedia Tools and Applications |
4 |
是 |
| 37 |
易可夫 |
Regularized Matrix Completion with Partial Side Information |
01 |
2020 |
Neurocomputing |
4 |
是 |
| 38 |
張健 |
Catalytic effect and mechanism of NiCu solid solutions on hydrogen storage properties of MgH2 |
01 |
2020 |
Renewable Energy |
4 |
是 |
| 39 |
張健(導師) |
Adsorption and diffusion behaviors of Ni-based filler elements on diamond surface |
01 |
2020 |
Journal of Alloys and Compounds |
4 |
是 |
| 40 |
張健(導師) |
Modifying effects and mechanisms of graphene on dehydrogenation properties of sodium borohydride |
01 |
2020 |
Journal of Materials Science |
4 |
是 |
| 41 |
張健(導師) |
冷凍干燥法制備有機蒙脫土及其改性瀝青性能研究 |
01 |
2020 |
材料導報 |
4 |
否 |
| 42 |
周小杰 |
Improved workability for Mg-Y-Zn alloys via increased volume fraction of block LPSO phases |
01 |
2020 |
Materials Science and Engineering: A |
4 |
是 |
| 43 |
周振華 |
The design of linear magnetic negative stiffness element for engineering application using rectangular permanent magnets |
02 |
2020 |
Journal of Magnetics |
4 |
是 |
| 44 |
周振華 |
基于負剛度結構的低頻速度傳感器的設計與分析 |
02 |
2020 |
傳感技術學報 |
3 |
否 |
| 45 |
周振華 |
基于雙環永磁體結構的多穩態能量采集器的建模及性能分析 |
02 |
2020 |
噪聲與振動控制 |
4 |
否 |
| 46 |
周振華 |
基于負剛度磁彈簧的超低頻振動速度傳感器的設計與性能分析 |
02 |
2020 |
儀表技術和傳感器 |
4 |
否 |
| 47 |
周振華（通訊） |
An efficient multi-objective optimization method based on the adaptive approximation model of the radial basis function |
01 |
2020 |
Structural and Multidisciplinary Optimization |
4 |
是 |
| 48 |
胡林 |
A Study on Correlation of Traffic Accident Tendency with Driver Characters using in-depth Traffic Accident Data |
02 |
2020 |
Journal of Advanced Transportation |
4 |
是 |
| 49 |
胡林 |
Casualty risk of e-bike rider struck by passenger vehicle using China in-depth accident data |
02 |
2020 |
Traffic Injury Prevention |
4 |
是 |
| 50 |
胡林 |
Investigation of clusters and injuries in pedestrian crashes using GIS in Changsha, China |
02 |
2020 |
Safety Science |
4 |
是 |
| 51 |
胡林 |
Reliable state of charge estimation of battery packs using fuzzy adaptive federated filtering |
02 |
2020 |
Applied Energy |
4 |
是 |
| 52 |
胡林 |
The injury epidemiology of adult riders in vehicle-two-wheeler crashes in China, Ningbo, 2011-2015 |
02 |
2020 |
Journal of Safety Research |
4 |
是 |
| 53 |
胡林 |
A Review of Research on Traffic Conflicts Based on Intelligent Vehicles |
02 |
2020 |
IEEE Access |
4 |
是 |
| 54 |
胡林 |
年齡因素對行人下肢損傷的影響研究 |
02 |
2020 |
機械工程學報 |
2 |
否 |
| 55 |
胡椰姿（導師：胡林） |
A Review of Research on Traffic Conflicts Based on Intelligent Vehicles Perception Technology |
02 |
2020 |
ICACMVE 2019 |
4 |
否 |
| 56 |
胡林（通訊作者） |
Study on the Driving Style Adaptive Vehicle Longitudinal Control Strategy |
02 |
2020 |
IEEE/CAA Journal of Automatica Sinica |
4 |
是 |
| 57 |
黃浩銘等 |
Broadband Radar Absorbing Performance of Corrugated Structure |
02 |
2020 |
Composite Structures |
4 |
是 |
| 58 |
黃浩銘等 |
Broadband radar absorbing characteristic based on periodic hollow truncated cone structure |
02 |
2020 |
Physica B: Condensed Matter |
4 |
是 |
| 59 |
張鵬 |
基于近似測地線的分層次自動鋪帶軌跡規劃方法 |
02 |
2021 |
機械工程學報 |
2 |
否 |
| 60 |
伍文廣 |
Collaborative Optimization of Nonlinear Hydropneumatic Suspension Dynamic Characteristics |
01 |
2020 |
Journal of Testing and Evaluation |
4 |
是 |
| 61 |
伍文廣 |
High-Precision Dynamics Characteristic Modeling Method Research considering the Influence Factors of Hydropneumatic Suspension |
01 |
2020 |
Shock and Vibration |
4 |
是 |
| 62 |
伍文廣 |
Adaptive Cruise Control Strategy Design with Optimized Active Braking Control Algorithm |
01 |
2020 |
Mathematical Problems in Engineering |
4 |
是 |
| 63 |
李奇奇 |
Design of resonant structures in resin matrix to mitigate the blast wave with a very wide frequency range |
01 |
2020 |
Smart Materials and Structures |
4 |
是 |
| 64 |
李奇奇 |
The feedback artificial tree (FAT) algorithm |
01 |
2020 |
Soft Computing |
4 |
是 |
| 65 |
李奇奇 |
Development of a multi-objective artificial tree (MOAT) algorithm and its application in acoustic metamaterials |
01 |
2020 |
Memetic Computing |
4 |
是 |
| 66 |
雷正保 |
Topology optimization for crashworthiness
of cyclic symmetric isosceles under dynamic
response constraints |
02 |
2020 |
International Journal of Crashworthiness |
4 |
是 |
| 67 |
雷正保（導師） |
A Sigmoidal and Distance Combined Transformation Method for Nearly Singular Integral on Asymmetric Patch |
02 |
2020 |
Symmetry |
4 |
是 |
| 68 |
雷正保（導師） |
Multi-Objective Robust Design of New Rotate Barrel Based on Satisfaction Function |
02 |
2020 |
Technical Gazette |
4 |
是 |
| 69 |
雷正保 |
獨立樁抗撞結構的碰撞相容性優化設計方法 |
02 |
2020 |
機械工程學報 |
2 |
否 |
| 70 |
雷正保 |
基于碰撞安全性的可導向防撞墊設計 |
02 |
2020 |
機械強度 |
3 |
否 |
| 71 |
雷正保 |
汽車多元動態系統仿真模型響應分析方法 |
02 |
2020 |
汽車技術 |
3 |
否 |
| 72 |
雷正保 |
TB級可導向防撞墊吸能盒拓撲優化設計 |
02 |
2020 |
機械強度 |
3 |
否 |
| 73 |
雷正保（導師） |
基于耐撞性拓撲優化的防撞墊吸能盒穩健性設計 |
02 |
2020 |
機械強度 |
3 |
否 |
| 74 |
雷正保 |
抗撞結構樁基關系研究的不足與措施 |
02 |
2020 |
公路交通科技 |
3 |
否 |
| 75 |
雷正保 |
公路安全防護技術研究動態與趨勢 |
02 |
2020 |
公路工程 |
4 |
否 |
| 76 |
雷正保（導師） |
折臂式隨車起重機轉臺的拓撲優化設計 |
02 |
2020 |
現代制造工程 |
4 |
否 |
| 77 |
雷正保（導師） |
高空作業飛機除冰車調平機構優化設計 |
02 |
2020 |
工程機械 |
4 |
否 |
| 78 |
雷正保（導師） |
飛機除冰車變幅機構鉸點位置多目標優化設計 |
02 |
2020 |
機械設計 |
4 |
否 |
| 79 |
蔣仁言 |
A standard-based approach for multi-criteria performance evaluation of engineered systems |
04 |
2020 |
Reliability Engineering and System Safety |
4 |
是 |
| 80 |
蔣仁言 |
A novel MTTF estimator and associated parameter estimation method on heavily censoring data. |
04 |
2020 |
Quality and Reliability Engineering International |
4 |
是 |
| 81 |
蔣仁言 |
A novel parameter estimation method for the Weibull distribution on heavily censored data |
04 |
2020 |
Proc IMechE Part O: Journal of Risk and Reliability |
4 |
是 |
| 82 |
蔣仁言 |
A novel two-fold sectional approximation of renewal function and its applications |
04 |
2020 |
Reliability Engineering and System Safety |
4 |
是 |
| 83 |
蔣仁言 |
Two approximations of renewal function for any arbitrary lifetime distribution. |
04 |
2020 |
Annals of Operations Research |
4 |
是 |
| 84 |
蔣仁言 |
Estimating MTTF of a component based on spare parts consumption data. |
04 |
2020 |
Engineering Assets and Public Infrastructures in the Age of Digitalization, Chapter 60 |
4 |
是 |
| 85 |
蔣仁言 |
A simple and accurate approximation to renewal function of gamma distribution. |
04 |
2020 |
Handbook of Performability Engineering, Springer, chapter 24 |
4 |
是 |
| 86 |
蔣仁言 |
A practical approximation of Weibull renewal function for solving relevant optimization problems |
04 |
2020 |
Quality Engineering |
4 |
是 |
| 87 |
張明軍 |
Understanding root humping in high-power laser welding of stainless steels: a combination approach |
02 |
2020 |
The International Journal of Advanced Manufacturing Technology |
4 |
否 |
| 88 |
張明軍 |
Optimization of the Fibre Laser Welding of Galvanized Steel in a Lap Joint Confguration |
02 |
2020 |
Lasers in Engineering |
4 |
否 |
| 89 |
賀湘宇 |
The applications of energy regeneration and conversion technologies based on hydraulic transmission systems: A review |
02 |
2020 |
Energy Conversion and Management |
4 |
是 |
| 90 |
賀湘宇 |
Overview of applications of the sensor technologies for construction machinery |
02 |
2020 |
IEEE Access |
4 |
是 |
| 91 |
唐昆 |
3D打印制備各向異性超疏水功能表面的定向輸送性能 |
02 |
2020 |
表面技術 |
3 |
否 |
| 92 |
唐昆 |
不同退火溫度下 a-C:Si 涂層的熱穩定性研究 |
02 |
2020 |
表面技術 |
3 |
否 |
| 93 |
胡永樂 |
First-principle calculation investigation of NbMoTaW based refractory high entropy alloys |
01 |
2020 |
Journal of Alloys and Compounds |
4 |
是 |
| 94 |
仝永剛 |
Carbon fiber reinforced ZrC based ultra-high temperature ceramic matrix composite subjected to laser ablation: Ablation resistance, microstructure and damage mechanism |
01 |
2020 |
Ceramics International |
4 |
是 |
| 95 |
仝永剛 |
Influence of alloying elements on mechanical and electronic properties of NbMoTaWX (X = Cr, Zr, V, Hf and Re) refractory high entropy alloys |
01 |
2020 |
Intermetallics |
4 |
是 |
| 96 |
仝永剛 |
Titanium alloying enhancement of mechanical properties of NbTaMoW refractory high-Entropy alloy: First-principles and experiments perspective |
01 |
2020 |
Journal of Alloys and Compounds |
4 |
是 |
| 97 |
陳小敏 |
An enhanced Johnson–Cook model for hot compressed A356 aluminum alloy |
02 |
2020 |
Advanced engineering materials |
4 |
是 |
| 98 |
何建軍 |
Quick and Highly Efficient Modal Analysis Method Based on the Reanalysis Technique for Large Complex Structure and Topology Optimization |
02 |
2020 |
INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS |
4 |
是 |
| 99 |
劉鵬 |
Analysis on Dynamic Response Characteristics of High-Speed Solenoid Valve for Electronic Control Fuel Injection System |
02 |
2020 |
Mathematical Problems in Engineering |
4 |
是 |
| 100 |
尹來容 |
A solution-region approach for synthesis linkages with coincident intantaneous center and one fixed pivot |
02 |
2020 |
Journal of Mechanical Science and Technology |
4 |
是 |
| 101 |
高凱 |
A Review of Research on Intersection Control Based on Connected Vehicles and Data-Driven Intelligent Approaches |
02 |
2020 |
Electronics |
4 |
是 |
| 102 |
高凱 |
An Integrated Algorithm for Intersection Queue Length Estimation Based on IoT in a Mixed Traffic Scenario |
02 |
2020 |
Applied Sciences |
4 |
是 |
| 103 |
高凱（導師） |
Driving Intention Oriented Real-time Energy
Management Strategy for PHEV in Urban V2X
Scenario |
02 |
2020 |
iThings 2020 |
4 |
否 |
| 104 |
周振華 |
Design and experimental validation of a vibration isolator with high-static-low-dynamic-stiffness and operating point variable property |
02 |
2020 |
Journal of Vibration and Control |
4 |
是 |
| 105 |
劉志強 |
路面附著系數的自適應衰減卡爾曼濾波估計 |
02 |
2020 |
中國公路學報 |
2 |
否 |
| 106 |
侯志祥 |
The maximum power tracking of variable step fuzzy logic control based on power prediction |
02 |
2020 |
Int. J. Power Electronics, |
4 |
否 |
| 107 |
賀尚紅 |
非等分葉片間距葉片式機油泵的內流場分析與試驗研究 |
02 |
2020 |
華南理工大學學報（自然科學版） |
3 |
否 |
| 108 |
武和全 |
Head injury of CHARM-70 FE model and a
comparative study with Hybrid III and GHBMC model |
2 |
2020.11 |
International Journal of Vehicle Safety |
4 |
EI |
| 109 |
武和全 |
老年乘員在自動駕駛車輛中的碰撞響應研究 |
2 |
2020.6 |
機械工程學報 |
2 |
EI |
| 110 |
賀尚紅 |
Performance prediction and experimental
study of variable displacement vane oil pump |
02 |
2020 |
The Journal of Engineering |
4 |
否 |
| 111 |
杜榮華 |
評《思想政治理論課教學科研分析報告(2017)》 |
19 |
2020 |
科研管理 |
6 |
11 |
| 112 |
唐宏賓 |
地方高校機械類專業新工科人才培養模式改革探索與實踐 |
19 |
2020 |
科教導刊 |
7 |
5 |
| 113 |
張旭 |
“汽車營銷學”課程融合思政內容教學改革與實踐 |
19 |
2020 |
科學咨詢 |
7 |
|
| 114 |
武和全 |
以工程應用能力為導向的獨立學院汽車服務工程專業人才培養模式研究 |
19 |
2020 |
科教導刊 |
7 |
5 |
