彭旭龍，副教授
一、教育背景：
2001-2005 中南大學，工程力學學士
2005-2010 中南大學，工程力學博士（博士導師：李顯方教授）
2017-2021 長沙理工大學，土木工程博士后（合作導師：張建仁教授、唐雪松教授）
二、工作經歷：
2010-2016 長沙理工大學，講師
2016年11月至今 長沙理工大學，副教授
2019年9月至2020年9月 美國內布拉斯加大學，訪問學者
三、研究方向：
功能梯度材料相關的靜動力學問題分析
壓電/磁電材料的斷裂問題
近場動力學理論與應用。
四、主講課程：
材料力學，結構力學，彈性力學，工程力學問題與分析方法（自然科學）
五、科研項目
1、湖南省自然科學青年基金項目，2016JJ3002，功能梯度材料對稱結構的多場耦合問題研究，2016/01-2019/12，5萬元，已結題，主持
2、國家自然科學基金青年基金項目，11202038，功能梯度材料對稱結構的靜動力學問題研究，2013/01-2015/12，24萬元，已結題，主持
3、湖南省教育廳科學研究項目，13C1031，各向異性功能梯度材料的軸對稱問題研究，2013-2015，1萬元，已結題，主持
4、國家自然科學基金項目，11172051，具脫層層合結構的非線性動力學建模、理論分析與實驗研究，2012/01-2015/12，已結題，參加
5、國家自然科學基金項目，11102028，濕熱條件下具脫層壓電層合結構的非線性動力特性及脫層擴展研究，2012-2014，已結題，參加
6、國家自然科學基金項目，51108047，基于橋梁響應的車輛軸重識別方法研究，2012-2014，已結題，參加
7、長沙理工大學橋梁與隧道工程創新項目，11CA10，各向異性功能梯度材料的多場耦合力學問題研究，2010-2012，已結題，主持
8、中南大學首批優秀博士學位論文扶植項目，2008yb023，功能梯度材料相關的幾個動靜態問題分析及結構優化，2009-2010，已結題，主持
9、國家自然科學基金項目，10672189，T應力及其對裂紋擴展路徑的影響，2007-2009，已結題，參加
六、專著章節
1、Xian-fang Li*, Xu-long Peng. Chapter 7: Cylindrically- or spherically-symmetric problems of functionally graded materials. In: Nathan J. Reynolds (Editor), Functionally Graded Materials, New York: Nova Science Publishers, Inc. 2011, pp. 1-56. (ISBN 978-1-61209-616-2)
七、期刊論文
[1] Li Zhang, Haiping Huang, Bing Zhao, Xulong Peng*. Effect of gradient on the deflection of functionally graded rectangular microcantilever induced by surface stress. Materials Today Communications, 2020, 25, 101598.
[2] Xulong Peng, Li Zhang, Zi-Xuan Yang, Zhan-Yong Feng, Bing Zhao, Xian-Fang Li. Effect of gradient on the deflection of functionally graded microcantilever beams with surface stress. Acta Mechanica, 2020, 231, 4185-4195.
[3] Bing Zhao, Tao Liu, Jian Chen, Xulong Peng, Zhanping Song. A new Bernoulli–Euler beam model based on modified gradient elasticity. Archive of Applied Mechanics, 2019, 89, 277-289.
[4] Peng Xu-long, Han De-qian, Cao si-qi, Yang Jian-qiang. Thermal stresses of polar orthotropic FGM hollow sphere with arbitrary gradient. Journal of Changsha University of Science and Technology (Natural Science), 2017, 14(4): 55-61. (In Chinese).
[5] Zhao Bing, Liu Tao, Pan Jun, Peng Xulong, Tang xuesong. A stress analytical solution for Mode III crack within modified gradient elasticity. Mechanics Research Comminications, 2017, 84: 142-147.
[6] Wencong Shi, Z.-B. Shen, X.-L. Peng, X.-F. Li. Frequency equation and resonant frenquency of free-free Timoshenko beams with unequal end masses. International Journal of Mechanical Sciences, 2016, 115-116: 406-415.
[7]Wang Yayun, Chen Deliang, Peng Xulong, Zhou Lu. The differential quadrature method for dynamic buckling of ftraight beam under elastic compression wave. Natural Science Journal of Xiangtan University, 2016, 38(3): 30-34. (In Chinese).
[8] X.-L. Peng, X.-F. Li, G.-J. Tang, Z.-B. Shen. Effect of scale parameter on the deflection of a nonlocal beam and application on energy release rate of a crack. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), 2015, 95(12): 1428-1438.
[9]X.S. Tang, X.L. Peng. An energy density zone model for fatigue life prediction accounting for non-equilibrium and non-homogeneity effects, Theoretical and Applied Fracture Mechanics, 2015, 79: 105-112.
[10] Yayun Wang, Xulong Peng, Deliang Chen. Free vibration of axially functionally graded beams with non-uniform cross-section. Chinese Journal of Solid Mechanics, 2015, 36(5): 105-112. (In Chinese).
[11] Peng Xu-long, Yang Jian-qiang. Elastic analysis of functionally graded polar orthotropic sandwich circular ring. Journal of Changsha University of Science and Technology(Natural Science), 2015, 12(4): 50-55. (In Chinese).
[12]Yang Wu, Peng Xu-long, Li Xian-fang. Natural frequencies of longitudinal vibration of cone-shaped nanotubes. Journal of Vibration and Shock, 2014, 33(2): 158-162. (In Chinese).
[13] Yang Jin Hua, Chen De Liang, Peng Xu Long. Delamination buckling of piezoelectric laminated cylindrical shell under axial compression, 3rd International Conference on Advanced Engineering Materials and Technology, AEMT 2013, 2013/5/11-2013/5/12: 1207-1211, Zhangjiajie, China, 2013.
[14] X. L. Peng, X. F. Li. Effects of gradient on stress distribution in rotating functionally graded solid disks. Journal of Mechanical Science and Technology, 2012, 26(5): 1483-1492.
[15] X. L. Peng, X. F. Li. Elastic analysis of rotating functionally graded polar orthotropic disks. International Journal of Mechanical Sciences, 2012, 60(1): 84-91.
[16] Xu-Long Peng, Xian-Fang Li. Thermal stress in rotating functionally graded hollow circular disk. Composite Structures, 2010, 92(8): 1896-1904.
[17] X. L. Peng, X. F. Li. Thermoelastic analysis of a cylindrical vessel of functionally graded material. International Journal of Pressure Vessels and Piping, 2010, 87(5): 203-210.
[18] Xu-long PENG, Xian-fang Li. Transient response of temperature and thermal stresses in a functionally graded hollow cylinder. Journal of Thermal stresses, 2010, 33(5): 485-500.
[19] Xian-Fang Li, Xu-Long Peng, Kang Yong Lee. The static response of functionally graded radially polarized piezoelectric spherical shells as sensors and actuators. Smart Materials and Structures,2010, 19(3): 035010.
[20] X. F. Li, X. L. Peng, Kang Yong Lee. Radially polarized functionally graded piezoelectric hollow cylinders as sensors and actuators. European Journal of Mechanics - A/Solids, 2010，29(4): 704-713.
[21] Li X F, Tang B Q, Peng X L, Huang Y. Influence of elastic T-stress on the growth direction of two parallel cracks. Structural Engineering and Mechanics, 2010，34(3): 377-390.
[22] Xu-Long Peng, Xian-Fang Li, Kang Yong Lee. Interface crack problem of functionally graded piezoelectric materials: effects of the position of electromechanical impact and gradient. Acta Mechanica, 2009, 207: 69-82.
[23] Xu-Long Peng, Xian-Fang Li. Transient response of the crack-tip field in a magnetoelcectroelastic half-space with a functionally graded coating under impacts. Archive of Applied Mechanics, 2009, 79: 1099-1113.
[24] Xu-long PENG, Xian-fang Li. Thermoelastic analysis of functionally graded annulus with arbitrary gradient. Applied Mathematics and Mechanics (English Edition), 2009, 30(10): 1211-1220.
[25] Xu-long PENG, Xian-fang Li. Thermoelastic analysis of functionally graded annulus with arbitrary gradient. Applied Mathematics and Mechanics, 2009, 30(10): 1135-1142. (In Chinese).
[26] Xian-Fang Li, Xu-Long Peng. A pressurized functionally graded hollow cylinder with arbitrarily varying material properties. Journal of Elasticity, 2009, 96: 81-95.
[27] Xian-Fang Li, Xu-Long Peng, Ying-An Kang. Pressurized hollow spherical vessels with arbitrary radial nonhomogeneity. AIAA Journal, 2009, 47: 2262-2265.
[28] Xian-Fang Li, Xu-Long Peng. Theoretical analysis of surface stress for a microcantilever with varying widths. Journal of Physics D-Applied Physics, 2008, 41: 1-10.
八、會議論文
[1] Peng Xulong*, Yang Jinhua. Thermal stresses in rotating functionally graded polar Thermal stresses in rotating functionally graded polar orthotropic hollow disks with power-law varying properties, 4th International Conference on Materials Engineering for Advanced Technologies (ICMEAT), 2015/6/27-2015/6/28: 306-309, London.
九、榮譽獎勵
[1] 彭旭龍(4/4)，《復雜狀態下復合材料及其結構的非線性靜、動力行為研究》，湖南省人民政府，湖南省自然科學獎，三等獎，2011
(陳得良，戴宏亮，楊金花，彭旭龍)
[2] 彭旭龍，《功能梯度材料相關的幾個動靜態問題分析及結構優化》，湖南省人民政府學術委員會，湖南省優秀博士學位論文，2012
[3] 彭旭龍, 《功能梯度材料相關的幾個動靜態問題分析及結構優化》. 2011年中南大學優秀博士學位論文.
歡迎有力學、數學或材料知識背景且有志于從事科學研究的學生報考研究生。
電子郵件：Email: [email protected]
